DiamondBack Polycrystalline Diamond Nozzles
The team at DiamondBack recently developed a proprietary Polycrystalline Diamond (PCD) nozzle to be used in 3D printing that can handle the most challenging applications! Easier to clean and reduces tip clogging, improves layer adhesion, has a solid diamond tip, any filaments, longer life, lowers operating temperature, and delivers unmatched wear resistance! Specifications : It is recommended that DiamondBack Nozzle users follow the operating specifications provided by each 3D printer manufacturer and each filament supplier. DiamondBack Nozzle temperatures should not exceed 300 Celsius .
Pro Tips
- Recommended torque specs: 2.5 Nm (Newton Meter)
- Recalibrate z-offset after install to protect print bed
- Run temperature tower as optimal temperatures are typically lower
- Recommended start temperatures:
- PLA.................200°C - 215°C
- PETG..............230°C - 250°C
- PETG Carbon....245°C - 265°C
- Maximum temperature 300°C
- Support and warranty details online at championx.com
Abrasive Material
This material is particularly abrasive among 3D printing filaments. Users may find standard brass nozzles are chewed through very quickly compared to standard wear and tear. When worn through, the nozzle diameter will widen inconsistently and the printer will experience extrusion issues.
Because of this, it's strongly recommended this material be printed through a hardened steel nozzle rather than a softer metal. Hardened steel nozzles can often be inexpensive and easily installed depending on your printer manufacturer's instructions.