Description
FibreX PPA+GF15
is a glass fiber reinforced polyphthalamide (PPA) with exceptional thermal,
mechanical, and chemical resistance. PPA’s are a special type of high
temperature nylon (HTN) – semi-aromatic polyamides – whose molecular
structure imparts significantly higher properties than aliphatic polyamides
such as PA6, PA66, PA11, and PA12, which are normally used in 3D printing.
PPA’s have significantly higher glass transition temperatures (Tg’s), melt
temperatures (Tm’s) and heat deflection temperatures (HDT’s) when compared to
typical aliphatic nylons such as PA6 or PA12. The chemical structure of PPA
reduces the amount of moisture that is absorbed as well as the rate at which
it is absorbed – resulting in a stiffer printed part once exposed to environmental
or end-use conditions. |
Benefits of FibreX PPA+GF15 :
- High thermal properties, with a Tg of 125°C, HDT of 260°C, and Tm of 305°C
- Excellent strength and stiffness over a wide temperature range, up to 260°C, higher than ULTEM™ PEI
- Very low moisture absorption yielding improved retention of mechanical properties even when exposed to humid environments
- Outstanding chemical resistance to alcohols, acids, automotive and jet fuels, oils, lubricants, brake and transmission fluids, antifreeze, and Zn/Ca Chlorides
Reviews
Print Recommendations
![365-390°C](http://www.3dxtech.com/cdn/shop/files/Rec_Extruder__Temp.jpg?v=1718023038&width=100)
Extruder Temp
325-345C
![140-160°C](http://www.3dxtech.com/cdn/shop/files/Rec_Bed_Temp.jpg?v=1718023060&width=100)
Bed Temp
120-140C
![Recommended](http://www.3dxtech.com/cdn/shop/files/Rec_Heated_Chamber.jpg?v=1718023095&width=100)
Heated Chamber
up to 140C
![0.4mm diameter minimum](http://www.3dxtech.com/cdn/shop/files/Rec_Nozzle_Specs.jpg?v=1718023127&width=100)
Nozzle Specs
.4mm diameter minimum
![0.10mm or higher](http://www.3dxtech.com/cdn/shop/files/Rec_Layer_Height.jpg?v=1718022948&width=100)
Layer Height
.25mm or higher
![65°C for 4 hours](http://www.3dxtech.com/cdn/shop/files/Rec_Drying_Specs.jpg?v=1718022745&width=100)
Drying Specs
120C for 4 hours
![](http://www.3dxtech.com/cdn/shop/files/Nozzle-Abrasion.png?v=1718882569&width=227)
Abrasive Material
This material is particularly abrasive among 3D printing filaments. Users may find standard brass nozzles are chewed through very quickly compared to standard wear and tear. When worn through, the nozzle diameter will widen inconsistently and the printer will experience extrusion issues.
Because of this, it's strongly recommended this material be printed through a hardened steel nozzle rather than a softer metal. Hardened steel nozzles can often be inexpensive and easily installed depending on your printer manufacturer's instructions.
Material DETAILS
Glass Fiber Reinforced Filament
![](http://www.3dxtech.com/cdn/shop/files/Rectangle111.png?v=1718882852&width=310)
What Is It?
DescriptionFibers made of glass reinforced into the polymer during manufacturing and aligned along the axis of filament.
This, along with their physical makeup, give this material enormous strength and mechanical properties.
![](http://www.3dxtech.com/cdn/shop/files/Rectangle222.png?v=1718883012&width=310)
What Does It Do?
Glass fiber reinforcement gives material a lot of desirable properties:
High strength
High stiffness
High chemical resistance
Low thermal expansion
![](http://www.3dxtech.com/cdn/shop/files/Rectangle333.png?v=1718883155&width=310)
How Does It Work?
Reinforcing plastic with glass fibers produces a 3D printing filament which exhibits the best properties of both fiberglass and the plastic of choice.
![](http://www.3dxtech.com/cdn/shop/files/Rectangle444.png?v=1718883273&width=310)
What Is It Good For?
Ideal for any applications which require strength and rigidity.
For these reasons, glass fiber reinforced filament is very popular in automotive, mechanical, civil engineering, and research industries.
RECOMMENDED
You May Also Like
Make confident choices and discover the best printing solutions.