3DXTech Technical and Safety Data Sheets
We strive to provide our customers with the most dependable and accurate Technical Data Sheets (TDS) and Safety Data Sheets (SDS) for our products.
This data was generated on actual 3D printed ISO specimen and tested by our resin company partners. We believe that the best use of this data is to assist our customers in comparing between grades of 3DXTECH materials so they can choose which may be the most appropriate for a given application.
TDS = Technical Data Sheet
SDS = Safety Data Sheet
Disclaimer: Technical data generated on 3D printed specimen are highly dependent upon the printer and the print settings applied. This data was created using 3D printed ISO specimen and is offered as reference only and is not intended to substitute end-use testing that may be required to determine fitness for any specific use.
Recommended Printing Experience
Novice: A beginner using an entry-level 3D printer should have minimal problems using this material.
Intermediate: User has several months of experience with a moderate to high quality printer.
Advanced: User has > 1 year of printing experience and is using a high quality commercial printer.
Expert: User has significant amount of experience and is using a high-performance or heavily modified printer These categories are somewhat arbitrary, but come from many years of our own printing experience as well as troubleshooting with customers.
REACH/RoHS Documentation | ![]() |